Walnut Colour Mulberry Hardwood Flooring

 

	Walnut Colour Mulberry Hardwood Flooring  Dimensions:1840*98*14mm  Area/carton : 1.442m²                   £37.50/M² +VAT  Finish: 6 UV Coating Supper Matte  Installation type: Tongue & Groove  Varnish: "Treffert"-Highly durable and anti-scratch  Adhesive: "Dyno"-E1 standard
Free Shipping on the order over £500

Tong Ling Walnut Colour Mulberry Hardwood Flooring suitable with under floor heating, can be installed in entrance hallways, kitchens, bedrooms, lounges and games rooms.  With its unique and beautiful texture, Tong Ling mulberry hardwood flooring comes in two tones: natural and stained walnut colours for sophisticated residences and prestige commercial buildings. Tong Ling Walnut Colour Mulberry Hardwood Flooring is created by mechanically stripping mulberry branches, then after boiling in a water and boric acid solution to remove sugars (a termite attractant) and to inhibit fungus and mold growth. The strips are dried and the material is woven with Dyno, an extremely low VOC plasticizer from Norway. Then it is crushed in a 2000-ton heat press that operates at 265F. This strand woven mulberry board is then milled in a German, laser-guided mill that makes very accurate cuts so each board you receive is cut just like every other board that comes out of the shipping carton. After milling, the strand woven mulberry boards are sanded and coated with a 6-coat build-up process with Aluminum Oxide Finish. Tong Ling mulberry hardwood flooring is extremely durable and very easy to care for or refinish. Tongue-and-groove mulberry hardwood flooring installs like conventional wood floors which are milled with tongue and grooves on all four sides so no special installation techniques are required. Our material is so advanced that it can be nailed, glued or floated over a thin foam mat where only the edges are glued.

You may also need Walnut Colour Mulberry Hardwood Flooring Accessories
	Walnut Colour Mulberry Hardwood Skirting Board Dimensions:1840*92*14mm                   £ 18.00 each+VAT
	Skirting board, also commonly referred to as baseboard or wall base, provides a beautiful transition from your mulberry floor to the wall. Mulberry skirting board provides an adequate thickness to cover the gap between your mulberry flooring and the wall.
	Walnut Colour Mulberry Hardwood Stair Nose Dimensions:1840*92/66*14/20mm        £ 25.00 each+VAT
	Sometimes called bull nose, stair nose is used to provide an overhang on a stair or a step from one floor to another. Stair nose can either overlap the floor or remain flush with the floor (with a tongue and grove edge). Please note that stair nose should always be secured properly - always with glue or nails.
	Walnut Colour Mulberry Hardwood T Moulding Dimensions:1840*45*14mm                     £ 23.00 each+VAT
	Mulberry T-Molding joins two areas of hard-surface floors of equal height seamlessly and easily, filling the gap at doorways, and finishing spaces between two areas of floor covering. Mulberry T-Moldings also recommended, when making the transition from mulberry floors to another floor type of approximately the same height.
	Walnut Colour Mulberry Hardwood Reducer Dimensions:1840*45*14mm                     £ 23.00 each+VAT
	Mulberry reducer provides a smooth transition from your mulberry flooring to another lower floor such as tile, linoleum, or concrete.
Please see the Installation Guide for different ways of flooring installation.
If doing Floating fitting, you may need underlay.
	Timbertech Flooring Underlay Dimensions: 1M * 10M *3mm                       £25.00 /roll+VAT Area/roll : 10m²
	Timbertech Underlay significantly reduce in-room noise due to their heavy mass stability. Timbertech Underlay is NOT suitable with under floor heating.
	X-Pro Tack Flooring Underlay Dimensions: 1M * 10M *3mm                        £42.00 /roll+VAT Area/roll : 10m²
	X-Pro Tack Underlay has a strong adhesive coating on one side covered with a peelable protective silliconised PE-film. Flooring can be adhered to this surface without applying any glue vastly reducing installation time. X-Pro Tack Underlay can be used with or without under floor heating.
	Tuplex Flooring Underlay Dimensions: 1.1M * 30M *3mm                     £55.00 /roll+VAT Area/roll : 33m²
	Tuplex underlay is ONLY suitable with under floor heating.
If doing Glue Down fitting, you may need adhesive.
	Sikabond T54 13Kg Wood Flooring Glue 13KG Coverage 18m² (max)                   £73.65 /can +VAT
	Sikabond T54 Wood Flooring Glue is a non solvent or water based product, and complies with E1 regulations. This product without odours, stays flexible once dry, for sticking down to wood or concrete floor.